Verify that you have the correct firmware, then remove the USB flash drive from your computer, and insert it back into one of the USB ports on your recorder. Once you have successfully formatted your USB flash drive, remove it and insert it into your computer's USB port and download the firmware we sent via email. To format your USB flash drive using your recorder, please read the full instructions here. IMPORTANT: We highly recommend that you format your USB flash drive using your recorder. Next, format your empty USB flash drive using your recorder. NOTE: The download link will expire in a specified period of time. We will send the firmware download link via email. When calling, make sure you have your recorder's the correct model number and a valid email address at hand. To upgrade your recorder to the latest firmware, call our Technical Support at 1-88 and request for your recorder's latest firmware. There are two ways of upgrading the firmware of your recorder: USB Upgrade and Cloud Upgrade.įor this procedure, you need (1) the latest firmware for your recorder, (2) a formatted and empty USB flash drive, (3) access to a computer with internet connection, and (4) a valid email address. If you are still having difficulties setting up your DVR box(es), please CONTACT US.IMPORTANT: All Lorex firmware updates are free of charge.

Click HERE for instructions on reprogramming the remote.Check that the batteries have a charge and are inserted correctly.Be sure there is nothing blocking a clear line of sight between the digital box and the remote.Press CABLE on the remote to ensure it's in the proper mode.Confirm digital box is plugged into a working power outlet.Verify power cord is attached firmly to digital box.Confirm TV or digital box volume is not muted.Check that cables are connected securely (hand tighten if necessary).

Check that the TV is set to the proper input.

Make sure all cables to and from the digital box are connected securely.

Confirm the digital box is connected directly to the cable outlet.Confirm the digital box is connected properly.OPTIONAL: If you do not have an HDMI port on the back of your television, connect a second coaxial cable from the back of the television to the port on the new box labeled To TV. *Please make note of the HDMI input used on the TV as you'll need to tune your television to this input once you turn it on. Turn on TV and tune to appropriate HDMI input.Connect power cord from the DVR Box to the power outlet.Connect HDMI cable from the DVR Box to the HDMI input* on your HDTV.Connect coax cable from the wall outlet to CABLE IN on the DVR Box.

How do i upgrade mediacom to dvr